Product Description
Inch/Metric
Order No. |
Range | Accuracy | Remarks |
293-330-30 | 0-1in / 0-25.4mm |
.00005in | with ratchet stop |
293-331-30 | 1-2in / 25.4-50.8mm |
.00005in | with ratchet stop, with standard |
293-332-30 | 2-3in / 50.8-76.2mm |
.00005in | with ratchet stop, with standard |
293-333-30 | 3-4in / 76.2-101.6mm |
.0001in | with ratchet stop, with standard |
293-334-30 | 0-1in / 0-25.4mm |
.00005in | with ratchet thimble |
293-335-30 | 0-1in / 0-25.4mm |
.00005in | with friction thimble |
293-336-30 | 1-2in / 25.4-50.8mm |
.00005in | with friction thimble, with standard |
293-340-30 | 0-1in / 0-25.4mm |
.00005in | with ratchet stop, without SPC |
293-341-30 | 1-2in / 25.4-50.8mm |
.00005in | with ratchet stop, with standard, without SPC |
293-342-30 | 2-3in / 50.8-76.2mm |
.00001in | with ratchet stop, with standard, without SPC |
293-343-30 | 3-4in / 76.2-101.6mm |
.0001in | with ratchet stop, with standard, without SPC |
293-344-30 | 0-1in / 0-25.4mm |
.00005in | with ratchet thimble, without SPC |
293-345-30 | 1-2in / 25.4-50.8mm |
.00005in | with ratchet thimble, with standard, without SPC |
293-346-30 | 2-3in / 50.8-76.2mm |
.00005in | with ratchet thimble, with standard, without SPC |
293-347-30 | 3-4in / 76.2-101.6mm |
.0001in | with ratchet thimble, with standard, without SPC |
293-348-30 | 0-1in / 0-25.4mm |
.00005in | with friction thimble, without SPC |
293-349-30 | 0-1in / 0-25.4mm | .0001in | with ratchet thimble, without SPC |
293-350-30 | 4-5in / 101.6-127mm |
.0001in | with ratchet stop, with standard |
293-351-30 | 5-6in / 127-152.4mm |
.0001in | with ratchet stop, with standard |
293-352-30 | 6-7in / 152.4-177.8mm |
.00015in | with ratchet stop, with standard |
293-353-30 | 7-8in / 177.8-203.2mm |
.00015in | with ratchet stop, with standard |
293-354-30 | 8-9in / 203.2-228.6mm |
.00015in | with ratchet stop, with standard |
293-355-30 | 9-10in / 228.6-254mm |
.00015in | with ratchet stop, with standard |
293-356-30 | 10-11in / 254-279.4mm |
.00015in | with ratchet stop, with standard |
293-357-30 | 11-12in / 279.4-304.8mm |
.00015in | with ratchet stop, with standard |
Technical Data
Accuracy: Refer to the list of specifications.
Resolution: 0.001mm or .00005"/0.001mm
Flatness: 0.3µm/.000012”
Parallelism: 1µm/.00004” for models up to 50mm/2”
2µm/.00008” for models up to 100mm/4”
3µm/.00012” for models up to 175mm/7”
4µm/.00016” for models up to 275mm/11”
5µm/.0002” for models over 300mm/12”
Measuring faces: Carbide tipped
Display: LCD
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 1.2 years under normal use
(8 months: over 100mm models)
Dust/Water protection level: IP65
Function
Origin-set, Zero-setting, Automatic power on/off, Data hold, Data output, inch/mm conversion
(inch/mm models)
Alarm: Low voltage, Counting value composition error
Optional Accessories
05CZA662: SPC cable with data switch (1m/40”)
05CZA663: SPC cable with data switch (2m/80”)
The Mitutoyo 293 series Coolant Proof LCD micrometer has a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm) for outside diameter (OD) measurement, and a ratchet-stop mechanism that helps provide precise, repeatable measurement.
The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An output jack transmits Statistical Process Control (SPC) data results to a computer or external device through an interface cable (sold separately). The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet.. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.
Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.
Additional Information
SKU | 293-micrometer |
---|---|
Manufacturer | Mitutoyo |
Gage Type | Micrometer |
Gage Cable | 05CZA662, 05CZA663 |