Mitutoyo 500-197-30 8"/200mm ABSOLUTE AOS Digimatic Caliper Without SPC Output

  • Measuring range: 0-8"/0-200mm
  • Resolution: .0005in 0.01mm
  • Accuracy: ±.001in
  • Availability: In stock

    $255.00
    OR

    Mitutoyo 500-197-20 ABSOLUTE Digimatic Caliper

    Double click on above image to view full picture

    Zoom Out
    Zoom In

    More Views

    • Mitutoyo 500-197-20 ABSOLUTE Digimatic Caliper

    Product Description

    Series 500 - ABSOLUTE AOS Digimatic Caliper - with Exclusive ABSOLUTE Encoder Technology
     

    Features

    • New Electromagnetic Inductive (AOS) System.
    • Large and clear LCD readout.
    • The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).
    • Data Hold Unit (959143) is optional.
    • Carbide-tipped jaw type calipers are also available.
    • With thumb roller. Except 500-505-10, 500-506-10,500-507-10.
    • Supplied in fitted plastic case. Except 1000mm / 40” supplied in wooden case.

    Technical Data
    Accuracy: Refer to the list of specifications
    Resolution: 0.01mm or .0005"/0.01mm
    Repeatability: 0.01mm / .0005”
    Display: LCD
    Length standard: ABSOLUTE  electromagnetic induction type linear encoder
    Max. response speed: Unlimited
    Battery: SR44 (1 pc.), 938882
    Battery life: Approx. 3.5 years under normal use

    Function
    Origin-set, Zero-setting, Data output, inch/mm conversion
    (inch/mm models ONLY)
    Alarm: Low voltage, Counting value composition error

    Optional Accessories
    959143: Data hold unit
    959149: SPC cable with data switch (1m / 40”)
    959150: SPC cable with data switch (2m / 80”)

     

    The Mitutoyo ABSOLUTE 500 series caliper is a Digimatic digital caliper that is made of durable hardened stainless steel and uses Mitutoyo’s ABSOLUTE linear encoder technology, which allows you to “set and forget” the origin and measure in awkward or difficult locations.

    This digital caliper has LCD readout and function control buttons on the caliper face, including Origin to set and retain the original measuring point, and Zero/ABS (Absolute Scale) to zero-set the LCD display. It uses the metric measuring system.

    Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper also has an LCD, which clearly shows values and increases reading reliability over the other types, and reflects all ABSOLUTE system activities. The Absolute Scale (ABS) function tracks the origin point you set, even after shutoff. Once on again, the caliper can immediately start measuring, without zero resetting or concern of overspeed errors. The LCD can be "zeroed out" before making and comparing incremental measurements without having to subtract the first measurement from the second.

    The calipers use the ABSOLUTE electrostatic capacitance linear encoder which helps prevent overspeed errors. They measure outer diameter (OD), inner diameter (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer "steps" are measured. LCD Resolution is 0.01mm. Also included are origin-setting, zero-setting, and on/off automatic shutoff function buttons. A Digital LCD Data Reading Hold function is available with the optional Data Hold Unit (sold separately). An alarm alerts the user to low voltage and scale contamination and counting value composition errors. A rolling thumb wheel makes fine adjustments and a thumb screw locks the scale’s position. Response speed is unlimited. Each caliper includes, and is powered by, one SR44 silver oxide cell battery that lasts approximately 3.5 years with continuous normal use.

    Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display at any point along the slide, with an LCD that displays a single value in English and/or metric units.

    We Also Recommend

    You may also be interested in the following product(s)

    938882 Mitutoyo SR44 Replacement Battery, 1.5v

    938882 Mitutoyo SR44 Replacement Battery, 1.5v

    $6.75
    Mitutoyo 500 Series ABSOLUTE AOS Digimatic Calipers

    Mitutoyo 500 Series ABSOLUTE AOS Digimatic Calipers

    From: $163.00

    To: $2,033.30

         

    Additional Information

    SKU 500-197-30
    UPC 603908407478, 603908314202
    EAN 4946368526294
    Weight (in lbs) 1.2
    Manufacturer Mitutoyo
    Gage Type Caliper
    Gage Cable 959149, 959150
    Measuring range 0-8"/0-200mm
    Resolution .0005in/0.01mm
    Accuracy ±.001in