Product Description
543 Series FEATURES
With max./min. value holding function model of the ID-C Series Digimatic Indicators.
- The maximum, minimum, or runout value can be displayed during measurement.
- GO/±NG judgment is performed by setting the upper and lower tolerances for max., min. and runout values.
- High speed sampling ratio of 50 times/s.
- Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle "Absolute Position" from the origin at power-on.
Technical Data
Accuracy: Refer to the list of specifications.
Resolution: 0.001mm, .00005”/0.001mm or .0001”/0.001mm
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed: Unlimited
Measuring force: 1.5N or less
Battery: SR44 (2 pcs.), 938882
Battery life: Approx. 800 - 1300 hours under normal use
Dust/Water protection level: IP42
Function
Origin-set/Preset, Zeroset, GO/±NG judgment, Max/Min/Runout value holding, Counting direction switching, Power
ON/OFF, Data output,inch/mm conversion (on inch/metric models only)
Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error
Optional Accessories
905338: SPC cable (40” / 1m)
905409: SPC cable (80” / 2m)
902011: Spindle lifting lever (ISO/JIS type)
902794: Spindle lifting lever (ANSI/AGD type)
540774: Spindle lifting cable (stroke: .4” / 10mm)
We Also Recommend
You may also be interested in the following product(s)
Additional Information
SKU | 543-302B-10 |
---|---|
UPC | 603908274780 |
Weight (in lbs) | 0.5 |
Manufacturer | Mitutoyo |
Gage Type | Indicator |
Gage Cable | 905409 |
Measuring range | .500"/12.7mm |
Resolution | .00005"/0.001mm |
Accuracy | ±.00012" |
Remarks | Flat Back, Min/Max Value Hold Function |