Mitutoyo 543-282 ABSOLUTE Digimatic Indicator with SPC output, Green/Red LED GO/NG Signal, ID-C

Measuring Range .5" / 12.7mm
Resolution .00005" / 0.001mm
Accuracy .00012"

Lug Back, Min/Max Value Hold Function, Green/Red LED GO/NG Signal

Availability: In stock

$567.00
OR
 

Mitutoyo 543-282 ABSOLUTE Digimatic Indicator with SPC output, Green/Red LED GO/NG Signal, ID-C

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Mitutoyo 543-282 ABSOLUTE Digimatic Indicator with SPC output, Green/Red LED GO/NG Signal, ID-C

Product Description

543 Series Features
  • With the max./min. value holding function, the signal ID-C can output the signal of the GO/±NG judgment result against the peak values set. Substitute for the mechanical/electrical contact, the judgment is carried out by calculating the measurement data obtained. This provides high reliability with no deterioration of the contact point and volume adjustment.
  • The signal can be output to an external device like a sequencer through the NPN open-collector.
  • The GO/±NG judgment result is also indicated by the green/red LED and the "<, O, >" signs on LCD.
  • Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle "Absolute Position" from the origin at power-on.
  • The Signal ID-C achieves the IP54 protection level to resist dust and contaminants for safe operation in harsh machine shop environments.

Technical Data
Accuracy: Refer to the list of specifications.
Resolution: 0.001mm, .00005”/0.001mm or .0001”/0.001mm
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed: Unlimited
Measuring force: 2.0N or less
Power supply: DC 12 - 24V±10%
Dust/Water protection level: IP54

Function
Data output (–NG/OK/NG signal, NPN open collector), Remote control (hold-preset, preset-recall, zero-set), Origin-
set/Preset, Zeroset, GO/±NG judgment, Max/Min/Runout value holding, Counting direction switching, Power
ON/OFF, inch/mm conversion (on inch/metric models only)
Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error

Optional Accessories
902011: Spindle lifting lever* (ISO/JIS type)
902794: Spindle lifting lever* (ANSI/AGD type)
540774: Spindle lifting cable* (Stroke: .4” / 10mm)
125317: Rubber boot
*When using the spindle lifting lever/cable, IP54 is not guaranteed.

We Also Recommend

Additional Information

SKU 543-282
EAN 4946368364155
Weight (in lbs) 1
Manufacturer Mitutoyo
Gage Type Indicator
Gage Cable 905409
Measuring range .5" / 12.7mm
Resolution .00005"/0.001mm
Accuracy ±.00012"
Remarks Lug Back, Min/Max Value Hold Function, Green/Red LED GO/NG Signal