Product Description
- This new-generation digital indicator offers the excellent accuracy and functionality expected from this class of indicator. Take advantage of its high accuracy backed up by 0.5ìm / .00002" resolution, remote control functionality via a handheld controller (or an RS-232C interface) and easy runout measurements with the well-established analog bar display.
- The maximum, minimum, or runout value can be displayed during measurement.
- GO/±NG judgment is performed by setting the upper and lower tolerances. If a judgment result is out of tolerance, the display backlighting changes from green to red, so tolerance judgment can be made at a glance.
- With SPC data output.
- With RS-232C input/output
Technical Data
Accuracy: Refer to the list of specifications.
Resolution: 0.0005mm/0.001mm or .00002”/.00005”/.0001”/0.0005mm/0.001mm
Display: LCD
Length standard: Linear encoder
Max. Response speed: 1000mm/s
Measuring force: 2.0N/2.5N* or less (*60mm range models)
Power supply: 6V DC (via AC adaptor)
Function
Origin-set/Preset, Zeroset, GO/±NG judgment, Max/Min value hold, Runout measurement, Resolution switching, Counting
direction switching, Power ON/OFF, Data output, inch/mm conversion (on inch/metric models only)
Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error
Standard Accessories
09EAA119A: AC Adapter 120v
137693: Lifting Lever
Optional Accessories
936937: SPC cable (40” / 1m)
965014: SPC cable (80” / 2m)
21EAA131: RS-232C cable (80” / 2m)
21EZA099: Remote controller
540774: Spindle lifting cable (stroke: .4” / 10mm)
21EZA101: Spindle lifting knob
264-504-5A: Digimatic Min-processor DP-1VR
543-004A: Digimatic presetter
*Required when orienting the indicator upside down
We Also Recommend
You may also be interested in the following product(s)
Additional Information
SKU | 543-561A |
---|---|
EAN | 4946368500317 |
Weight (in lbs) | 2 |
Manufacturer | Mitutoyo |
Gage Type | Indicator |
Gage Cable | 905409 |
Measuring range | 0-30.4mm |
Resolution | 0.0005mm, 0.001mm |
Accuracy | +/-0.0015mm |