FlexPort Single Input Gage Interface FP-1025 for Mahr Federal Maxum & Maxum III Indicators

The FlexPort FP-1025 accepts the signal from Mahr Federal Maxum & Maxum III Indicators and converts it to a standardized format (RS232 serial) for populating any software package you choose. (SPC software packages have a driver for this format).

The FlexPort FP-1025 offers four ways to request a reading to be sent to your PC:
- Send button (on the gage or cable)
- Send button (on the front of FlexPort FP-1025)
- Data send jack (contact closure from hand or footswitch)
- PC host commands (send host commands to request a reading)

For the port, a data send button and data send input jack as well as a data send LED is provided.  The LED turns on when data is requested and automatically turn off when data has been sent.

Availability: In stock

$195.00

File downloads

Description
For Models FP-1025-06, FP-1051-06, FP-1200-06, FP-1225-06, FP-1425-06

$195.00
 

FlexPort Gage Interface FP-1M for Mitutoyo Digimatic Gages

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • FlexPort Gage Interface FP-1M for Mitutoyo Digimatic Gages
  • MahrFederal Maxum Indicators

Product Description

The FlexPort FP-1025 accepts the signal from Mahr Federal Maxum & Maxum III Indicators and converts it to a standardized format (RS232 serial) for populating any software package you choose. (SPC software packages have a driver for this format).

Sending data to your computer is easy. 

The FlexPort FP-1025 offers four ways to request a reading to be sent to your PC:
- Send button (on the gage or cable)
- Send button (on the front of FlexPort FP-1025)
- Data send jack (contact closure from hand or footswitch)
- PC host commands (send host commands to request a reading)

For the port, a data send button and data send input jack as well as a data send LED is provided.  The LED turns on when data is requested and automatically turn off when data has been sent.

The FlexPort FP-1025 accepts the signal from Mitutoyo and digimatic output devices and converts it to a standardized format (RS232 serial) sending the readings to your computers communication port (serial port). Regardless of the format of the reading, the FlexPort FP-1025 will format the reading into a standard format.  Since we work with most SPC vendors, most software packages have a driver for this format.  Programs running on the computer grab this reading and place it into your software for error free data entry.

The FlexPort FP-1025 is supplied with wall adapter power supply and 6ft. serial cable.

Optional:  Use the USB converter cable to convert the DB9 output to USB.  The USB cable will install a Virtual COMport allowing data collection software to see and read the interface as if it is connected to a standard serial port.

Additional Information

SKU FP-1025
Weight (in lbs) 1
Manufacturer Midwest FlexSystems Inc
Number of inputs 1 Device
Input type Gage Specific
Output type Standard RS232
Power Supply 110v Wall Adapter 7-9VDC Center Positive
Gage Input Connector Mahr Federal Maxum, Maxum III
Data Send Input 2.5mm jack, data send button
Output Connector DB9 Female