Product Description
The FlexPort FP-1200-06 accepts the signal from Mahr Federal Maxum & Maxum III Indicators and converts it to a standardized format (RS232 serial) for populating any software package you choose. (SPC software packages have a driver for this format).
Sending data to your computer is easy.
The FlexPort FP-1200-06 offers four ways to request a reading to be sent to your PC:
- Send button (on the gage or cable)
- Send button (on the front of FlexPort FP-1200-06)
- Data send jack (contact closure from hand or footswitch)
- PC host commands (send host commands to request a reading)
For the port, a data send button and data send input jack as well as a data send LED is provided. The LED turns on when data is requested and automatically turn off when data has been sent.
The FlexPort FP-1200-06 accepts the signal from Ono Sokki EG225, DG525, and DG3610 devices and converts it to a standardized format (RS232 serial) sending the readings to your computers communication port (serial port). Regardless of the format of the reading, the FlexPort FP-1200 will format the reading into a standard format. Since we work with most SPC vendors, most software packages have a driver for this format. Programs running on the computer grab this reading and place it into your software for error free data entry.
The FlexPort FP-1200-06 is supplied with wall adapter power supply and 6ft. serial cable.
Optional: Use the USB converter cable to convert the DB9 output to USB. The USB cable will install a Virtual COMport allowing data collection software to see and read the interface as if it is connected to a standard serial port.
Additional Information
SKU | FP-1200-06 |
---|---|
Weight (in lbs) | 1 |
Manufacturer | Midwest FlexSystems Inc |
Number of inputs | 1 Device |
Input type | Gage Specific |
Output type | Standard RS232 |
Power Supply | 110v Wall Adapter 7-9VDC Center Positive |
Gage Input Connector | Ono Sokki EG225, DG525, DG3610 |
Data Send Input | 2.5mm jack, data send button |
Output Connector | DB9 Female |