ASI/Datamyte

ASI/Datamyte

We are pleased to offer ASI DataMyte compatible cables for the mulitplexers manufactured previously by Applied Stats, ASI/DataMyte and DataMyte. ASI/DataMyte has multiple interfaces with various connectors.  Since many products were based on their portable data collectors they had specialty connectors for the gage cables.  Midwest FlexSystems Inc. offers cables to match that requirement. 

Over the years, we have always striven to design and build the most compatible and user-friendly systems available.  Combine that with our 100% dedication to customer satisfaction and it is plain to see why Midwest FlexSystems Inc. has been the leader in gage interface and cabling products.

If you can find the gage listed anywhere throughout the site, we can most likely provide you with the cable you need.  Please contact our technical support personnel and discuss your needs...we gladly assist both before and after the sale.

Gage (if not listed, call for info) Description Cable Number for output
Click below to order
Notes
DM12-905692-06 DataMyte 12 pin to Mitutoyo gage cable (6 ft)
(12 pin connector)
DM12-905692-06 b
DM12-965013-06 DataMyte 12 pin to Mitutoyo gage cable (6 ft)
(12 pin connector)
DM12-965013-06 b
DM8-05CZA663-06 DataMyte 953 Cable to Mitutoyo gage type (6 ft)
(8 pin connector)
DM8-05CZA663-06 c
DM8-64AAA017-16 DataMyte 953 Cable to Mitutoyo gage type (16 ft)
(8 pin connector)
DM8-64AAA017-16 c
DM8-1035-06 DataMyte 953 Cable to Mahr Federal Maxum III gage type (6 ft)
(8 pin connector)
DM8-1035-06 c
DM8-905409-06 DataMyte 953 Cable to Mitutoyo gage type (6 ft)
(8 pin connector)
DM8-905409-06 c
DM8-959150-06 DataMyte 953 Cable to Mitutoyo gage type (6 ft)
(8 pin connector)
DM8-959150-06 c
DM8-965015-06 DataMyte 953 Cable to Mitutoyo gage type (6 ft)
(8 pin connector)
DM8-965015-06 c
DM8-1425-06 DataMyte 953 Cable to CDI Logic Indicator (6 ft)
(8 pin connector)
DM8-1425-06 c
DM8-91718-06 DataMyte 953 Cable to DB25 Male RS232 connector (6 ft)
(8 pin connector)
DM8-91718-06 a, c
Note: If you don't find your gage listed, please call Midwest FlexSystems, Inc. directly to discuss cabling options
 a:  This cable is an AutoDetect version that will automatically configure itself to the gage parameters, no configuration necessary. 
       There is also a standard version of the cable available that needs to be configured
 b:  This is a Mitutoyo gage cable with a 12 pin DataMyte connector.
 c:  This is a Mitutoyo gage cable with an 8 pin DataMyte connector.

10 Item(s)

per page

Grid  List 

Set Descending Direction

10 Item(s)

per page

Grid  List 

Set Descending Direction