Products
Related Products
Check items to add to the cart or select all
My Cart
You have no items in your shopping cart.
Product Description
The FlexPort M29 accepts the signal from Mitutoyo and digimatic output devices and converts it to a standardized format (RS232 serial) sending the readings to your computers communication port (serial port). Regardless of the format of the reading, the FlexPort M29 will format the reading into a standard format. Since we work with most SPC vendors, most software packages have a driver for this format. Programs running on the computer grab this reading and place it into your software for error free data entry.
Sending data to your computer is easy.
The FlexPort M29 offers two ways to request a reading to be sent to your PC:
- Send button (just press the data button on the gage or cable)
- PC host commands (Send commands from PC to request a reading be sent)
The FlexPort M29 draws power directly from the DB9 serial port.
Optional: Use the USB converter cable to convert the DB9 output to USB. The USB cable will install a Virtual COMport allowing data collection software to see and read the interface as if it is connected to a standard serial port.
Additional Information
| SKU | FP-M29 |
|---|---|
| Short Description | The FlexPort FP-M29 accepts the signal from Mitutoyo gages and converts it to a standardized format (RS232 serial) for populating any software package you choose. (SPC software packages have a driver for this format). The FlexPort M29 offers two ways to request a reading to be sent to your PC: Downloads: |
| Number of inputs | 1 Mitutoyo Only |
| Input type | Mitutoyo Only = Mitutoyo Digimatic and MTI Compatibles |
| Output type | Standard RS232 |
| Power Supply | Powered via RS232 Port |
| Gage Input Connector | 10-pin Male (Mitutoyo Digimatic) |
| Output Connector | DB9 Female |
