Mitutoyo 543-262B ABSOLUTE Digimatic Indicator with SPC output, ID-C

FEATURES: With max./min. value holding function model of the ID-C Series Digimatic Indicators. The maximum, minimum, or runout value can be displayed during measurement. GO/±NG judgment is performed by setting the upper and lower tolerances for max., min. and runout values. High speed sampling ratio of 50 times/s. Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle "Absolute Position" from the origin at power-on. Technical Data Accuracy: Refer to the list of specifications. Resolution: 0.001mm, .00005”/0.001mm or .0001”/0.001mm Display: LCD Length standard: ABSOLUTE electrostatic capacitance type linear encoder Max. response speed: Unlimited Measuring force: 1.5N or less Battery: SR44 (2 pcs.), 938882 Battery life: Approx. 800 - 1300 hours under normal use Dust/Water protection level: IP42 Function Origin-set/Preset, Zeroset, GO/±NG judgment, Max/Min/Runout value holding, Counting direction switching, Power ON/OFF, Data output,inch/mm conversion (on inch/metric models only) Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error Optional Accessories 905338: SPC cable (40” / 1m) 905409: SPC cable (80” / 2m) 902011: Spindle lifting lever (ISO/JIS type) 902794: Spindle lifting lever (ANSI/AGD type) 540774: Spindle lifting cable (stroke: .4” / 10mm)