Mitutoyo 543-266B ABSOLUTE Digimatic Indicator with SPC output, ID-C

FEATURES: This ID-C Series Digimatic Indicators are exclusively designed for ID measurement. The minimum value holding function provides the easy of detection of hole diameter. An analog bar indicator is integrated to enhance the intuition in reading. GO/±NG judgment is performed by setting the upper and lower tolerances. Up to three sets of master value and upper/lower tolerance value can be memorized. Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle "Absolute Position" from the origin at power-on. Technical Data Accuracy: Refer to the list of specifications. Resolution: 0.001mm or .00005”/0.001mm Display: LCD Length standard: ABSOLUTE electrostatic capacitance type linear encoder Max. response speed: Unlimited Measuring force: 1.5N or less Battery: SR44 (2 pcs.), 938882 Battery life: Approx. 2000 hours under normal use Dust/Water protection level: IP42 Function Origin-set/Preset, Zeroset, GO/±NG judgment, Counting direction switching, Power ON/OFF, Data output,inch/mm conversion (on inch/metric models only) Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error Optional Accessories 905338: SPC cable (40” / 1m) 905409: SPC cable (80” / 2m) Applicable Gages Series 511 and 526