Mitutoyo 543-392 ABSOLUTE Digimatic Indicator with SPC output, ID-C

FEATURES: As compact as standard Series 2 dial indicators. Large, easy-to-read LCD. GO/±NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/±NG) can be displayed in full-size characters. The positive/negative count resulting from the spindle’s up/down movement can be toggled. Internal calculations using the simple formula of [F(x)=Ax)] are available Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle "Absolute Position" from the origin at power-on. Also unlimited response speed eliminates over-speed errors. The ID-C indicator face can be rotated 330° to an appropriate angle for easy reading. With SPC data output. Technical Data Accuracy: Refer to the list of specifications. Resolution: 0.01mm, 0.001mm, .0005"/0.01mm, .0001”/0.001mm or .00005”/0.001mm Display: LCD Length standard: ABSOLUTE electrostatic capacitance type linear encoder Max. Response speed: Unlimited Measuring force: Refer to the list of specifications Battery: SR44 (1 pc.), 938882 Battery life: Approx. 5,000 hours under normal use Dust/Water protection level: IP42 or IP53 (dust-proof type) Function Origin-set/Preset, Zeroset, GO/±NG judgment, Counting direction switching, Power ON/OFF, Data output,inch/mm conversion (on inch/metric models only) Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error Internal calculations using the simple formula of [F(x)=Ax)] are available Optional Accessories 905338: SPC cable (40” / 1m) 905409: SPC cable (80” / 2m) 21EZA198: Spindle lifting lever (ISO/JIS type)* 21EZA199: Spindle lifting lever (ANSI/AGD type)* 21EZA105: Spindle lifting knob(12.7mm/5"ISO/JIS type)** 21EZA150:Spindle lifting knob(12.7mm/5" ANSI/AGD type)** 21EZA197:Spindle lifting knob(25.4mm/1",50.8/2" models) 21EZA200:Spindle lifting knob(50.8mm/2") 540774: Spindle lifting cable (stroke: 1”/25.4mm) 02ACA571: Auxiliary spindle spring for 25mm/1” models*** 02ACA773: Auxiliary spindle spring for 50mm/2” models*** *Can be used on 12mm/.5” models only. **Not available for low measuring force models.