Mitutoyo 543 Series - ABSOLUTE Digimatic Indicator ID-C, Specially Designed for Bore Gage Application

This ID-C Series Digimatic Indicators are exclusively designed for ID measurement.

  • Key-Lock and Parameter-Lock to prevent accidental changing of settings during operation.
  • Increase the number of readings per second from 10 to 50.
  • The minimum value holding function provides the easy of detection of hole diameter.
  • An analog bar indicator is integrated to enhance the intuition in reading.
  • GO/±NG judgment is performed by setting the upper and lower tolerances.
  • Up to three sets of master value and upper/lower tolerance value can be memorized.
  • Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle "Absolute Position" from the origin at power-on.

Find your item in the drop-down menu or table below.

Availability: In stock

From: $378.00

To: $627.80

Price as configured: $0.00

Mitutoyo 543-312B-10 ABSOLUTE LCD Digimatic Indicator ID-C, for Bore Gage Application   +$378.00


* Required Fields

Price as configured: $0.00

Mitutoyo 543 Series ID-C, Bore Gage Application

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Mitutoyo 543 Series ID-C, Bore Gage Application

Product Description

SPECIFICATIONS

Inch/Metric (Stem dia. 3/8", #4-48 UNF Thread)
Resolution Range Order No.
Model Accuracy
.0001"/0.001mm .5" / 12.7mm 543-312B ID-C112GEXB .00010"/0.003mm

 

Inch/Metric (Stem dia. ø 8mm, M2.5 x 0.45 Thread)
Resolution Range Order No.
Model Accuracy
0001"/0.001mm
.5" / 12.7mm
543-311B ID-C112GMXB .00010"/0.003mm

 

Technical Data
Accuracy: Refer to the list of specifications.
Resolution: 0.001mm or .00005”/0.001mm
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed: Unlimited
Measuring force: 1.5N or less
Battery: SR44 (2 pcs.), 938882
Battery life: Approx. 2000 hours under normal use
Dust/Water protection level: IP42 

Function
Origin-set/Preset, Zeroset, GO/±NG judgment,Power ON/OFF, Data output,inch/mm
conversion (on inch/metric models only)
Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error 

Optional Accessories
905338: SPC cable (40” / 1m)
905409: SPC cable (80” / 2m)
Applicable Gages Series 511 and 526

Additional Information

SKU 543-bore
Manufacturer Mitutoyo
Gage Type Indicator
Gage Cable 905338, 905409